Manual Couplers, series MC
-
For use for palletized system installations
-
Available with or without pilot control internal valve
-
Auxiliary coupling block allowing to add detecting circuit
-
Manifold ports
-
Ports for tubes connection
-
Filtration to prevent contamination
-
Removable front panel allows access to frontal filters and checking insert
-
Upper port allows to connect the battery or pressure gauge
IC, PSCK-Series, Hydraulic Pressure Switches
-
Enerpac hydraulic pressure switches provide reliable electronic control of hydraulic
-
Compact design minimizes space requirements on fixture
-
Pressure switch is easily adjustable to meet system requirements
AC, AP, MHV-Series, Coupler Packages
-
Single design accommodates both single-acting or double-acting circuit
-
Relief valve fitted built-in and ball check shut-off
-
Glycerin-filled pressure gauge
-
Standard package supplied with one male coupler (AH-652)
-
Optional manifold mounting. O-ring seals located on bottom of block only for single-acting circuit
MHV-1 Modular Holding Valve
-
Allows separate operation of clamping fixtures with a single power source
-
Ideal for applications when fluid feed lines are impractical. If system pressure is interrupted, the MHV1 valve will hold the pressure below the valve
-
Maximum oil flow 5 l/min
-
To release system pressure, rotate valve handle in either direction 90o
Hydraulic couplers: High Flow and Quick Connection, series A, C
Enerpac Hydraulic Couplers:
Series C, High Flow Couplers:
-
High flow couplers are recommended for use on all Enerpac pumps and cylinders
Series A, Quick Connection Couplers:
-
Couplers with a low leakage rate for easy connection of hydraulic circuits
|
Maximum pressure |
Coupler package model number |
Socket model number |
Plug model number |
Thread size |
|
|---|---|---|---|---|---|
|
bar |
|
||||
|
700 |
|
C-604 |
CR-400 |
CH-604 |
3/8” NPT |
|
700 |
|
A-604 |
AR-400 |
AH-604 |
3/8” NPT |
|
350 |
|
– |
AR-650* |
AH-650 |
1/4” NPT |
|
350 |
|
– |
AR-650* |
AH-652 |
G1/4” |
|
350 |
|
– |
AR-650* |
AH-654 |
SAE #4 |
Digital pressure gauges, series DGR
-
Two options:
– automatic shut-off (after 15 min)
– continuous operation -
Zero reset – ensure that gauge reads actual pressure
-
IP 65 protection
-
Display for high pressure in bar, psi, MPa; low in kPa, MPa, hPa, mbar
-
Power supply 3 VDC (Type CR2430) – 1400 hours of operation in „continuous running” mode
Gauges accessories, series GA, GS, NV and V
Enerpac gauges accessories:
Series GA, Gauge Adaptor:
-
For easy mounting into the system
GA-918, Swivel Adaptor:
-
Makes it easy to install a pressure gauge and make readings
V-91 and NV- 251, Needle Valve:
-
Both models: NV-251 and V-91 provide positive shut-off
-
303 stainless steel stem, 16 threads/in (NV-251)
High Pressure Hoses, series H700
-
For demanding applications featuring a 4:1 safety factor
-
Maximum working pressure 700 bar
-
Outside jacket is polyurethane, to provide maximum abrasion resistance
-
Exhibits low volumetric expansion under pressure to enhance overall system efficiency
-
Crimped-on rubber strain relief at both ends assure improved lifetime of all models
|
Hose length |
Hose coupler end 1 |
Hose coupler end 2 |
Internal diameter |
Model number |
Maximum pressure |
Weight |
|---|---|---|---|---|---|---|
|
m |
mm |
bar |
kg |
|||
|
0,6 |
3/8”NPT |
3/8”NPT |
6,4 |
H-7202 |
700 |
0,5 |
|
0,9 |
3/8”NPT |
3/8”NPT |
6,4 |
H-7203 |
700 |
0,7 |
|
1,8 |
3/8”NPT |
3/8”NPT |
6,4 |
H-7206 |
700 |
0,9 |
|
3,0 |
3/8”NPT |
3/8”NPT |
6,4 |
H-7210 |
700 |
1,4 |
High Pressure Fittings, series BFZ, FZ
-
Enerpac high pressure fittings assure proper coupling of all hydraulic elements
-
Male and female thread fittings BSPP, UNF, NPT in popular in popular sizes allow easily combine all components.
-
Maximum pressure for BFZ and FZ-1000 fittings is 700 bar
-
Maximum pressure for FZ-2000 fitting is 350 bar
| From | To | Maximum pressure |
Model number | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|---|
| bar | A | B | C | D | ||||
 |
Fitting | |||||||
| G 1/4″ | 1/8″ NPTF | 700 | BFZ-16411 | 35 | 19 | 1/4″-18 NPTF | G 1/4″ | |
| G 1/4″ | 1/8″ NPTF | 700 | BFZ-16421 | 31 | 19 | 1/8″-27 NPTF | G 1/4″ | |
| G 3/8″ | 1/4″ NPTF | 700 | BFZ-16323 | 43 | 24 | 1/4″-27 NPTF | G 3/8″ | |
| G 3/8″ | 3/8″ NPTF | 700 | BFZ-16324 | 43 | 24 | 3/8″-27 NPTF | G 3/8″ | |
| 1/4″ NPTF | 1/8” NPTF | 700 | FZ-1642 | 31 | 19 | 1/8″-27 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 1/4” NPTF | 700 | FZ-1055 | 37 | 24 | 1/4″-18 NPTF | 3/8″-18 NPTF | |
| 1/2” NPTF | 1/4” NPTF | 700 | FZ-1633 | 43 | 29 | 1/4″-18 NPTF | 1/2″-14 NPTF | |
| 1/2” NPTF | 3/8” NPTF | 700 | FZ-1634 | 43 | 29 | 3/8″-18 NPTF | 1/2″-14 NPTF | |
| SAE #4 | 1/4” NPTF | 350 | FZ-2007 | 29 | 19 | 7/16″-20 UN | 1/4″-18 NPTF | |
| SAE #4 | 1/8” NPTF | 350 | FZ-2008 | 25 | 14 | 7/16″-20 UN | 1/8″-27 NPTF | |
| SAE #4 | SAE #2 | 350 | FZ-2022 | 29 | 17 | 5/16″-24 UN | 7/16″-20 NPTF | |
 |
Reducers | |||||||
| 1/4” NPTF | 3/8” NPTF | 700 | FZ-1630 | 22 | 22 | 1/4″-18 NPTF | 3/8″-18 NPTF | |
| 1/4” NPTF | 1/2” NPTF | 700 | FZ-1661 | 28 | 22 | 1/4″-18 NPTF | 1/2″-14 NPTF | |
| SAE #6 | SAE #8 | 350 | FZ-2029 | 35 | 27 | 3/4″-16 UN | 9/16″-18 UN | |
| 3/8” NPTF | G 1/4” | 700 | BFZ-16301 | 19 | 19 | G 1/4″ | 3/8″-18 NPTF | |
 |
Nipple | |||||||
| 1/4” NPTF | 1/4” NPTF | 700 | FZ-1608 | 37 | 16 | 1/4″-18 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1617 | 37 | 19 | 3/8″-18 NPTF | 3/8″-18 NPTF | |
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1619 | 51 | 19 | 3/8″-18 NPTF | 3/8″-18 NPTF | |
| 3/8” NPTF | G 1/4″ | 700 | BFZ-305 | 36 | 19 | 3/8″-18 NPTF | G 1/4″ | |
 |
Fitting | |||||||
| 1/4” NPTF | 1/4” NPTF | 700 | FZ-1605 | 29 | 19 | 1/4″-18 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 1/4” NPTF | 700 | FZ-1615 | 29 | 22 | 3/8″-18 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1614 | 29 | 22 | 3/8″-18 NPTF | 3/8″-18 NPTF | |
| 1/2” NPTF | 3/8” NPTF | 700 | FZ-1625 | 38 | 29 | 1/2″-14 NPTF | 3/8″-18 NPTF | |
 |
Elbow | |||||||
| 1/4” NPTF | 1/4” NPTF | 700 | FZ-1638 | 23 | 19 | 1/4″-18 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1610 | 26 | 22 | 3/8″-18 NPTF | 3/8″-18 NPTF | |
 |
Tee | |||||||
| 1/4” NPTF | 1/4” NPTF | 700 | FZ-1637 | 45 | 19 | 1/4″-18 NPTF | 1/4″-18 NPTF | |
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1612 | 52 | 22 | 3/8″-18 NPTF | 3/8″-18 NPTF | |
 |
Cross | |||||||
| 3/8” NPTF | 3/8” NPTF | 700 | FZ-1613 | 52 | 7/8″ | 3/8″-18 NPTF | 3/8″-18 NPTF | |
 |
Fitting adapter | |||||||
| 1/8” NPTF | SAE #4 | 350 | FZ-2075 | 27 | 17 | 1/8″-27 NPTF | 1/4″-18 NPTF | |
| 1/4” NPTF | SAE #4 | 350 | FZ-2042 | 33 | 17 | 1/4″-18 NPTF | 7/16″-20 UN | |
| 1/4″ NPTF | G 1/4″ | 700 | BFZ-16411 | 35 | 19 | 1/4″-18 NPTF | G 1/4″ | |
| SAE #4 | 1/8 NPTF | 350 | FZ-2008 | 25 | 14 | 7/16″-20 UN | 1/8″-27 NPTF | |
| SAE #4 | 1/4″ NPTF | 350 | FZ-2007 | 29 | 19 | 7/16″-20 UN | 1/4″-18 NPTF | |
| SAE #2 | SAE #4 | 350 | FZ-2022 | 26 | 14 | 5/16″-24 UN | 7/16″-20 UN | |
| SAE #6 | 1/4″ NPTF | 350 | FZ-2056 | 29 | 19 | 9/16″-18 UN | 1/4″-18 NPTF | |
| SAE #8 | 1/4″ NPTF | 350 | FZ-2067 | 29 | 22 | 3/4″-16 UN | 1/4″-18 NPTF | |
| SAE #8 | 3/8″ NPTF | 350 | FZ-2069 | 33 | 22 | 3/4″-16 UN | 3/8″-18 NPTF | |
| G 1/8″ | 1/8″ NPTF | 350 | FZ-2055 | 25 | 16 | G 1/8″ | 1/8″-27 NPTF | |
| G 1/8″ | 1/4″ NPTF | 350 | FZ-2060 | 33 | 19 | G 1/8″ | 1/4″-18 NPTF | |
| G 1/8″ | SAE #4 | 350 | FZ-2066 | 25 | 17 | G 1/8″ | 7/16″-20 UN | |
| G 1/4″ | 1/4″ NPTF | 350 | FZ-2023 | 33 | 19 | G 1/4″ | 1/4″-18 NPTF | |
| G 1/4″ | SAE #4 | 350 | FZ-2065 | 28 | 19 | G 1/4″ | 7/16″-20 UN | |
 |
Straight Union Fitting | |||||||
| SAE #4 | SAE #4 | 350 | FZ-2005 | 32 | 14 | 7/16″-20 UN | 7/16″-20 UN | |
| SAE #6 | SAE #6 | 350 | FZ-2028 | 36 | 17 | 9/16″-18 UN | 9/16″-18 UN | |
| SAE #8 | SAE #8 | 350 | FZ-2040 | 40 | 22 | 3/4″-16 UN | 3/4″-16 UN | |
 |
Straight Union Fitting to Tube Ends | |||||||
| ø 1/4″ | ø 1/4″ | 350 | FZ-2033* | 35 | 13 | 7/16″-20 UN | ø 1/4″ | |
| ø 1/4″ | ø 1/4″ | 350 | FZ-2013** | 52 | 13 | 7/16″-20 UN | ø 1/4″ | |
 |
Adaptor to Tube Ends | |||||||
| 1/8″ NPTF | ø 1/4″ | 350 | R-1054* | 31 | 13 | 1/8″-27 NPTF | ø 1/4″ | |
| 1/4″ NPTF | ø 1/4″ | 350 | FZ-2020* | 36 | 14 | 1/4″-18 NPTF | ø 1/4″ | |
| 1/4″ NPTF | ø 3/8″ | 350 | FZ-2072* | 36 | 16 | 1/4″-18 NPTF | ø 3/8″ | |
| 1/4″ NPTF | ø 1/4″ | 350 | FZ-2012** | 34 | 14 | 1/4″-18 NPTF | ø 1/4″ | |
| 3/8″ NPTF | ø 1/4″ | 350 | FZ-2061* | 37 | 19 | 3/8″-18 NPTF | ø 1/4″ | |
| 3/8″ NPTF | ø 3/8″ | 350 | FZ-2068* | 37 | 19 | 3/8″-18 NPTF | ø 3/8″ | |
| SAE #2 | ø 1/4″ | 350 | FZ-2025* | 26 | 14 | 5/16″-24 UN | ø 1/4″ | |
| SAE #4 | ø 1/4″ | 350 | FZ-2019* | 32 | 14 | 7/16″-20 UN | ø 1/4″ | |
| SAE #4 | ø 1/4″ | 350 | FZ-2001** | 29 | 14 | 7/16″-20 UN | ø 1/4″ | |
| SAE #6 | ø 1/4″ | 350 | FZ-2059* | 33 | 17 | 9/16″-18 UN | ø 1/4″ | |
| SAE #8 | ø 1/4″ | 350 | FZ-2039* | 35 | 22 | 3/4″-16 UN | ø 1/4″ | |
| SAE #8 | ø 3/8″ | 350 | FZ-2070* | 35 | 22 | 3/4″-16 UN | ø 3/8″ | |
| G 1/8″ | ø 1/4″ | 350 | FZ-2053* | 39 | 14 | G 1/8″ | ø 1/4″ | |
| G 1/4″ | ø 1/4″ | 350 | FZ-2054* | 35 | 19 | G 1/4″ | ø 1/4″ | |
| G 1/4″ | ø 3/8″ | 350 | FZ-2064* | 35 | 19 | G 1/4″ | ø 3/8″ | |
 |
Elbow to Tube Ends | |||||||
| 1/8″ NPTF | ø 1/4″ | 350 | FZ-2074* | 20 | 11 | 1/8″-27 NPTF | ø 1/4″ | |
| 1/4″ NPTF | ø 1/4″ | 350 | FZ-2073* | 28 | 14 | 1/4″-18 NPTF | ø 1/4″ | |
| 1/4″ NPTF | ø 1/4″ | 350 | FZ-2076** | 26 | 14 | 1/4″-18 NPTF | ø 1/4″ | |
| 1/4″ NPTF | ø 3/8″ | 350 | FZ-2081* | 28 | 14 | 1/4″-18 NPTF | ø 3/8″ | |
| 3/8″ NPTF | ø 1/4″ | 350 | FZ-2082* | 31 | 19 | 3/8″-18 NPTF | ø 1/4″ | |
| 3/8″ NPTF | ø 3/8″ | 350 | FZ-2083* | 31 | 14 | 3/8″-18 NPTF | ø 3/8″ | |
| SAE #2 | ø 1/4″ | 350 | FZ-2024* | 23 | 11 | 5/16″-24 UN | ø 1/4″ | |
| SAE #4 | ø 1/4″ | 350 | FZ-2035* | 26 | 14 | 7/16″-20 UN | ø 1/4″ | |
| SAE #4 | ø 1/4″ | 350 | FZ-2002** | 26 | 14 | 7/16″-20 UN | ø 1/4″ | |
| SAE #8 | ø 3/8″ | 350 | FZ-2071* | 37 | 22 | 3/4″-16 UN | ø 3/8″ | |
| G 1/8″ | ø 1/4″ | 350 | FZ-2051* | 26 | 14 | G 1/8″ | ø 1/4″ | |
| G 1/4″ | ø 1/4″ | 350 | FZ-2052* | 32 | 19 | G 1/4″ | ø 1/4″ | |
| ø 1/4″ | ø 1/4″ | 350 | FZ-2014** | 23 | 14 | ø 1/4″ | ø 1/4″ | |
 |
Swivel Banjo BSPP to Tube | |||||||
| G 1/4″ | ø 8 | 700 | BFZ-307 | 29 | 19 | G 1/4″ | ø 8 | |
 |
Swivel T-banjo BSPP to Tube | |||||||
| G 1/4″ | ø 8 | 700 | BFZ-309 | 29 | 19 | G 1/4″ | ø 8 | |
 |
Tee | |||||||
| ø 1/4″ | ø 1/4″ | 350 | FZ-2015** | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
| ø 1/4″ | ø 1/4″ | 350 | FZ-2021* | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
 |
Branch tee | |||||||
| SAE #4 | ø 1/4″ | 350 | FZ-2036* | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
| SAE #4 | ø 1/4″ | 350 | FZ-2004** | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
 |
Cross | |||||||
| ø 1/4″ | ø 1/4″ | 350 | FZ-2034* | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
| ø 1/4″ | ø 1/4″ | 350 | FZ-2016** | 45 | 14 | 7/16″-20 UN | ø 1/4″ | |
 |
SAE Plug | |||||||
| SAE #4 | – | 350 | FZ-2006 | 3 | 14 | 7/16″-20 UN | – | |
| SAE #6 | – | 350 | FZ-2003 | 3 | 17 | 9/16″-20 UN | – | |
 |
SAE Hex Plug | |||||||
| SAE #8 | – | 350 | FZ-2041 | 20 | 22 | 3/4″-16 UN | – | |
 |
Nut and Sleeve for Tubing | |||||||
| ø 1/4″ | – | 350 | FZ-2037* | 16 | 14 | 37° | ø 1/4″ | |
 |
Cap for Tubing | |||||||
| ø 1/4″ | – | 350 | FZ-2038* | 16 | 14 | 37° | ø 1/4″ | |
| ø 1/4″ | – | 350 | FZ-2017** | 15 | 14 | ø 1/4″ | ø 1/4″ | |
| ø 3/8″ | – | 350 | FZ-2011* | 19 | 17 | 37° | ø 3/8″ | |
FL-Series, High in Line Pressure Hydraulic Filters
-
Enerpac high in line pressure coaxial hydraulic filters keep system clean
-
Stainless steel wire mesh screen
-
Nominal pressure set at 350 bar for the whole system
-
Oil filtration during advance and retract
-
Two piece body construction for easy replacement of filter elements
-
High flow rates are obtainable with a minimum pressure drop
-
Threaded port connections on each end simplify installation
Pressure Gauge, series G
-
Enerpac pressure gauges are reliable
-
Accurate pressure measurement, ±1.5 % accuracy on the entire scale
-
All internal elements of gauge are damped in glycerin, what ensure long lifetime of instrument
-
Tear protection with a special disc and pressure leveling membrane prevents pressure from rising
-
For pressure of 70 bar and more: safe tubes made of copper Bourdon alloy
-
Dual scale reading for bar and psi
Hydraulic Manifolds, series A
-
Enerpac hydraulic manifolds series A are designated for multiple hydraulic line connections at one central location
-
Direct hydraulic oil to or from a pressure source
AC, WA-Series, Hydraulic Work holding Accumulator
-
Enerpac hydraulic work holding accumulators maintain circuit pressure
-
Ideal for high frequency and rapid discharge applications
-
ACL series is pre-charged to 100 bar
-
ACL series bodies are corrosion resistant
-
Spring actuated accumulator for ACM-1
-
Large capacity of battery energy storage in compact packaging
-
WA accumulators are plunger type
-
ACL accumulators are diaphragm type
-
ACM accumulators use internal spring
MCA, MPA, WCA-Series, Auto Coupler Systems
-
Enerpac auto-coupler systems are available in two (62 and 82 model) or four port (64 model) connection
-
Allow for automated coupling of hydraulic circuits on palletized systems
-
Sensors of coupler position allow for fully automated applications
-
Horizontal or vertical mounting for flexible installation on machine tools
-
Adjustment stroke allows clearance for pallet indexing
-
Coupler elements supplied with air blow-off nozzles to prevent damage from contamination
-
Two base auto-coupler models: WCA62 for low pallets clearance; WCA82 for additional pallet clearance
CR, CRV-Series, Rotary Hydraulic Couplers
-
Enerpac rotary fittings provide a constant hydraulic connection at the rotating workstation
-
Low starting torque
-
Internal oil bearings for increased lifetime
-
Couplers with one, two or four passages